Why Is My Electric Scooter Not Turning On? A Detailed Guide To Fixing Your E-Scooter

Electric scooters have been gaining popularity among people of different ages. But sometimes, they can malfunction, and technical problems can occur. In this guide, you can find some electric scooter troubleshooting tips. Why is my electric scooter not turning on

The electric scooter is not charging

First, make sure that the charger is plugged in and that the wall outlet functions. A blocked charger port is a common reason for charging problems. Unplug the scooter and clean the charger port from dust. Never put anything sharp in the port.

The charging issue is possible if the battery is old and takes more time to charge and holds less power.

Battery and battery pack

A lot of troubles might be linked to the electric scooter battery. If it has been used for a long time and is worn out, battery power can’t be fully recharged. Sometimes you will have no other option than getting a new battery pack. So, always test the battery, and you won’t unexpectedly run into issues.

You should always test the battery when you buy your electric scooter second-hand if you don’t want to buy a vehicle with a dead battery.

Lithium-ion batteries don’t die very often, but a Li-ion battery has a limited lifespan of approximately 5 years.

Battery charger

Sometimes the problem might be a defective charger. If it has a light indicator, make sure it shows green when charging. Inspect the voltage level of the charger’s output, it should be the same as the voltage of the battery pack. If the battery charger is damaged you should replace it, preferably with one from the same manufacturer.

The battery doesn’t remain charged

When you see that your battery pack doesn’t hold a charge, you´ll need to inspect the voltage of each battery cell. It shouldn’t be below the level recommended in the manual. Damaged cells must be replaced to prevent accidents.

Electric scooters shut off

If your electric scooter turns on but is cutting out while riding, you should inspect the fuse or circuit breaker. Some signs of it being broken are heating or lose wires. If the latter happens, adjust the loose connections and secure them properly, or see a specialist at the repair shop.

Taking out the fuse might be helpful to see if there’s a burnt connection inside, which is a sign of a blown fuse or circuit breaker.

Sometimes overloading or steep inclines can make the scooter cut out.

Why is my electric scooter not turning on

What do you do if your electric scooter isn’t turning on? This problem is linked to issues with the engine or some minor details.

First, check that the power switch and the key switch have no defects. If they’re connecting properly, but the electric scooter doesn’t move, try pushing from the ground before starting to move.

Commonly, electric scooters come with a kill switch that’s made to save energy while the scooter is charging. If your electric scooter doesn’t move, check if the kill switch is still on. However, a scooter might not move even with the kill switch turned off. In this case, the problem is the electric motor or engine.

Engine problems


The engine might be overheated. It becomes dangerous because if the engine heats, it means that the battery is affected as well. You can check the temperature of the motor by touching it or smelling it.

The level of overheating when you can feel a burning smell is concerning because it means some electrical components or wire connectors are burnt.

Where can you find the motor?

Some scooters have hub motors, and most scooters have a motor in the front or rear wheel.

The electric scooter moves too slowly

This issue occurs very often because of a low or dead battery or if the battery pack needs to be replaced. A faulty motor is also possible, but it occurs quite rarely compared to battery issues. The motor might be dirty, so if you see dust and debris piling up on it, clean it thoroughly with either a brush or compressed air.

Tire pressure

The problem can also occur when the tires have low air pressure. The contact patch of the tire becomes larger because of it, making driving harder since the resistance increases. Pump up the tires and inspect them for punctures.


Slow speed can be caused by an overload. Every vehicle has a weight limit and if your weight doesn’t match the capacity of the scooter, you might want to get another model that will ensure comfortable driving at the full speed you want.

Because of overloading, the circuit breaker will automatically trip, and the motor will be cut off.

Defective speed controller

A speed controller manages most of the functions of the scooter. Therefore, the fuse and all the wires are connected to it, so it’s important to check if there are any foreign objects, dirt, or water in the controller board that can cause a short circuit.

Electric scooter speed controller issues

The speed controller is very important. Not only does it manage the speed, but it also maintains your speed within a chosen limit.

If it doesn’t function, take apart the speed controller. Check the wires, and replace them immediately if needed. Some wires might be loose, secure them properly.

The motor runs constantly

Another issue that might occur if the speed controller is defective is when the motor runs constantly. The reason might also be the throttle cable. Disconnecting it from the speed controller can help, but if it doesn’t help then the motor is the problem, see previous tips on fixing the motor.

Electric scooter runs only without a rider on it

Again, the problem might be linked to the battery pack. The battery pack should be fully charged to have enough power. Ask someone to help you see to test the battery by asking them to push you on flat ground so that the application force starts your movement and your weight is distributed evenly on the scooter.

Uneven board

An unevenness of the board is also a possible thing to consider. If you start the scooter without yourself and then climb it, the board might be uneven, and your weight is not distributed evenly.

Electric scooter runs at partial throttle

After checking the battery, the battery charger, and the motor, inspect the brake lever switch. Just like with the killer switch or power switch, it’s very common to accidentally activate it. In this case, the throttle system is blocked.

Issues with brakes

Ensure that brake cables or pads function properly. Faulty brakes can lead to a partial throttle response for safety reasons.

Inspect the brakes for visible damage and dirt. Lubricating the brakes and adjusting the brake cable can help as well. If the damage is too great, you might need to replace your brake pads or damaged wires with new ones.


What is the most common reason for issues with electric scooters?

Most problems result from a faulty battery pack, charger, or power supply. You should always test the battery when buying an e-scooter from a previous owner because you might face too many issues after the purchase.

Why is the electric scooter not turning on?

Check the battery pack, and test the power switch and other switches. The key switch can be damaged as well. The ignition fuse might be on, then the scooter works, but it won’t start moving. The problem might also be with the circuit breaker or a broken fuse.

How do I reset my electric scooter? Is there a reset button on an electric scooter?

Resetting an electric scooter can help when it won’t start. Most electric scooters can be reset if you hold the power button for a few seconds or push a button on the left side of the battery box.

But there might be a separate button for resetting. You can always find the information about it in the manual. A reset procedure is usually described in detail there.

Where is the fuse on an electric scooter?

The fuse should be located near the motor, in front of the battery.


When something’s wrong with your electric scooter, first do the following:

  • Check the motor, if it’s dirty, overheated or there are loose wires, take appropriate actions.
  • Inspect the electric scooter battery.
  • Check the battery charger.
  • Check the electric scooter’s fuse or circuit breaker.
  • Check if the key switch and the power switch are in the right position.
  • Eliminate the possibility of a faulty speed controller of your e-scooter.
  • Inspect the brake lever switch.
  • Inspect the fuse and circuit breaker with a multi meter.

After considering all of these factors, you can enjoy your scooter to the fullest. Wonder when were scooters invented, read the article

Leave a Comment