Where Is The Reset Button On My Electric Scooter: Detailed Guide

Sometimes you ride an e-scooter and it just stops working or isn’t working properly. In this case, you can try to reset your scooter and see if it helps. Most scooters are equipped with a reset button that makes it easy to restart the scooter. To do this, simply press the reset button and hold it for a few seconds.

However, it can be frustrating if you can’t find the reset button on your electric scooter. And trust me, I’ve been in that situation. I’ve been looking for a reset button on my electric scooter for a long time, but I couldn’t find it. So, I decided to write this post to help you.

How to restart an electric scooter? Where is the reset button on my electric scooter?

If the scooter randomly turns off or loses power during use, in most cases, restarting the scooter can solve the problem. This also works when the battery is overcharged.

Your scooter is equipped with a reset button that can be used in an emergency to bring it back to life. Save yourself the trouble of knowing where this button is located on your device and how you should use it from time to time! Plus a guide to other possible electric scooter troubleshooting.

Where Is The Reset Button On My Electric Scooter

There is no one size fits all approach to resetting electric scooters. Some electric scooters can be reset using the power button on their display device. These switches act like multi-function keys – like on smartphones – allowing riders to turn on and reset the e-scooter with the same button.

Some electric scooters have their reset button near the handlebars, next to the power button. You will need to press it down and hold it for a few seconds.

Razor electric scooters and Pure electric scooters have their reset buttons on the left side of the driving handler.

However, not all electric scooters have this feature.

For example, to restart Xiaomi Mi, you need to simultaneously hold the brake lever, throttle, and power button for a few seconds while the electric scooter is turned off. Three seconds will be enough. After that, the scooter will make a series of brief beeps. Your screen may show a red 14 and a small red key symbol below it. After that, you can release all the buttons and levers and the hard reset is complete.

Resetting other electric scooters may require a different combination, so it’s best to refer to your e-scooter user manual for instructions on how to reset the device.

Note: When you perform a hard reset on your electric scooter, all your settings and Bluetooth connection will be reset. The scooter will be removed from the App on your smartphone, and you will have to add it again.

Read also: Top 4 electric scooters for college students

Can I restart my e-scooter using the power button?

66

Yes, you can reset an electric scooter using the power button. For example, Gotrax electric scooters work like that. These are the steps to follow:

  • Place the electric scooter on flat tires, a level surface.
  • Turn off the scooter and wait about 5 minutes.
  • Click the power button to turn it back on.
  • The power switch should now light up, and it should operate smoothly.

As you can see the Gotrax scooter reset button in its power button.

Read also: Best GoTrax electric scooter: detailed review of suitable models

I hope you have learned how to reset an electric scooter.

What other common issues can occur with an e-scooter? Let’s take a look below in the article.

Why my electric scooter is not working?

how to fix an electric scooter 1

There may be many reasons for this. Let’s take a look at some of the issues that can cause malfunction.

Lose power

Where Is The Reset Button On My Electric Scooter

There’s one thing that every e-scooter owner should know: when the scooter’s battery is low, it will turn on, but the motor won’t start. And the solution to this problem is simple: you’ll have to charge the scooter battery.

But sometimes you can notice that the battery won’t charge. In that case, the only solution will be to replace the battery. You can order a battery in an online store or contact the manufacturer to get the right battery.

Engine

Kaabo Mantis Pro motor

If the electric scooter being used turns on but does not start and therefore does not advance, it may be the motor that is broken or the connector is disconnected or damaged between the control board and the motor. In this case, open the scooter, then check that the cables and connectors are not disconnected, melted, burned, or damaged.

Plug in all wires and wire connectors to make sure they don’t come loose. You can also mechanically check and electrically check the motor if you have electrical clearances. The engine is usually located in the front wheel or in the frame.

Note. Some electric scooters are equipped with a safety system that prevents the motor from starting when the brake lever switch is applied. If so, you will need to disconnect the brake wire connector from the cruise control.

Then check if the motor is running and your scooter is moving forward again. If so, you need to replace the brake lever cable.

Blown or reversed circuit breaker

how to fix electric

All rechargeable battery-powered electric scooters can have an electrical issue. It’s natural.

For example, if you flipped the ignition electric scooter’s fuse. In this case, your buddy will turn on, but it definitely won’t go. The same thing happens if you blow the main fuse.

You can check the ignition fuses to see if it was reversed. If this is the case, simply return them to the on position and try starting the motor again.

If the electric scooter’s fuse wasn’t blown, it should work. Otherwise, you need to replace the blown fuse with a new one.

Motherboard

DSCF7054 scaled 1

When your electric scooter no longer starts, it could also be because the motherboard is faulty. In this case, the electric scooter will not start because its role is to control and power the other components of the scooter.

The motherboard can be found in various places on the scooter, but very often it is located next to the battery. First, make sure all wires are securely inserted into the connectors.

Then visually check to see if the elemental component present on the card looks damaged, melted, or burnt. If so, the problem is most likely coming from that component that has given up the ghost. You will either have to change it or change the entire motherboard.

Then you have to be electrically tested. If the output voltages are lower than the input voltage or zero, the board is faulty. Otherwise, it works fine. If one of them is faulty, the card is faulty and needs to be replaced.

The motor is heating up

a02 01

If the motor is heating up, it means that the battery is heating up too. And this will definitely reduce its power and can be dangerous.

That’s why this vehicle is equipped with a control system that will shut off the motor to prevent overheating. If not disabled, it may damage the battery beyond recovery.

To solve this problem, you should turn off the engine and let it cool down. If you notice that overheating occurs too often, you should take your e-scooter to a repair shop.

Accelerator

E Acc thumb throttle

Finally, when your electric scooter is not moving forward, the problem may be with the accelerator. Since different scooter models use different components for acceleration, we suggest that you view the online tutorial video that matches your scooter model.

Controller problem

maxresdefault 2

A controller is located on the electrical board (actually it’s all fuses and wires). If water, dust, or any other substance gets in it, it will break down, and the engine won’t start. In this case, you will need the help of professionals.

But in other cases, such as a loose wire, you can try to fix them yourself. Even with the transistor, there may be troubles, which is unlikely. But you never know. Check if anything has jumped out of its place.

Aging batteries

segway max battery f947a53f 6d0d 4b19 953d

If your electric scooter takes longer to charge and less time to fully discharge, you may be dealing with a dead battery. Lithium-ion batteries (or LiB) wear and tear are normal. This is usually a slow process that occurs as the battery ages and goes through several charge cycles.

The only thing the owners can do to prolong the scooter battery life is to take care of their e-scooters. There are some tips that can be used to increase the battery life of a hoverboard, which are also true for a scooter or electric bike battery.

Read also: How to fix an electric scooter: electric scooter troubleshooting guide

Why is my electric scooter throttle not working?

How to Fix an Electric Scooter Throttle

There are situations when you’re ready to ride, but the electric scooter doesn’t move a bit. Even if you twist the gas pedal hard, nothing. Probably the problem is in the electric scooter throttle. You will have to test it to see whether it works correctly or not.

There are many types of throttle. The half-effect or twist-bar choke is the most common. High-quality chokes or on-and-off chokes are also used widely.

However, never mind which one you have, the test is performed in the same way. So, whether you have a Gotrax scooter with a dead battery throttle or any other ride, you can troubleshoot the same way.

  1. Charge the battery to 100%
  2. Place the scooter on a smooth and level surface in an open and isolated place.
  3. A throttle body is made up of black, red, blue, or green wires. When you twist the throttle, the speed display and light should appear. If it is not so, it is possible that the connection between the controller and the throttle is faulty.
  4. Now you need to remove the fuse. Turn off the scooter and raise the rear wheels off the ground. Be sure to keep your distance with the rear wheels.
  5. Then connect +4.3VDC to the red throttle wire and the black wire to 4.3 VDC ground. Now attach a voltmeter to the blue-black wire.
  6. Afterward, you should replace the fuse and turn on the electric scooter.
  7. To start the motor, turn or rotate the throttle. At this point, you will see the engine turn on. If the motor doesn’t start, then there is an issue. Maybe it’s in the batteries, in the connection to the control unit, or in the ignition key. So, check for trouble. Conversely, if the motor runs without issues, this indicates a problem with the throttle.
  8. The voltmeter will show anything from 0 to 3+ volts. If you see the number below this, the problem is with the throttle.
  9. Now disconnect the wires and turn off the motor.

Electric scooter shuts off while riding

California Electric Scooter Laws scaled 1

Overloading the electric scooter may cause it to trip during use. Make sure you don’t exceed the rated weight limit of the e-scooter and don’t push the motor to the limit.

Why is my scooter not working properly?

How to Replace Change to Solid Tire in Xiaomi M365 Electric Scooter Wheels 2000x e1666611983774

As long as there is a connection issue with your electric scooter, the power switch will not light up. And in the end, the electric scooter turns off while riding. And this will create problems with starting the scooter.

So let’s check what you need to do to solve this problem:

  • Check for loose connections under the deck plate.
  • You must reconnect if there are free connections.
  • But if you don’t find any loose connections, then the trouble is somewhere else.
  • So, check the scooter’s power switch and replace it.

Where is the circuit breaker on an electric scooter?

maxresdefault 2 1

Circuit breakers are usually located on the outside of the scooter. The fuses are usually located on the outside of the scooter or under the footrest in the wiring harness next to the battery box. If the scooter has a circuit breaker, press the button reset to see if it resets.

Conclusion

So, this is our electric scooter repair guide for you. We believe that you now know some main issues you may encounter when using a scooter. And know how to solve them.

This electric scooter troubleshooting guide is designed to help you, and we hope we have helped you in this regard. But if you still have any questions, feel free to comment below. We will contact you as soon as possible with answers.

Read also: How To Lock A Scooter To A Bike Rack

Leave a Comment