A Complete Swagtron Hoverboard T580 Troubleshooting Guide

The Swagtron T580 is a cool hoverboard with add-on features. But the users have faced different problems from time to time.

So, what to do for the Swagtron hoverboard T580 troubleshooting?

Sometimes your Swagtron T580 can blink red light. Depending on the number of red light blinks, you can pinpoint the problem with your hoverboard. The red light flashing can indicate a loose connection, circuit malfunction, motor failure, battery failure, or gyroscope failure. When the hoverboard keeps beeping and flashing red lights, it needs to be recharged or calibrated. Other problems include a hoverboard that doesn’t start or charges slowly or one that is unbalanced.

Below you can find all the solutions to the problems we just mentioned. 

Swagtron Hoverboard T580 Troubleshooting Guide 

 Before we move on to the actual troubleshooting, let’s take a glimpse of all the problems first to get a better idea.

Problem  Reason Solution
Red light blinking Loose connection, 

Circuit malfunction,

Motor failure, 

Battery failure,

Gyroscope failure

Reconnect loose connection, replace the faulty component
Continuous beeping with a red light flashing Low battery  Recharge or reset the hoverboard
Charging slowly Temperature issue, charger issue, battery issue Provide optimal temperature, replace battery or charger
Not turning on Charger or battery issue Use the charger properly or replace the battery
Not balancing Self-balancing not working, disconnected wires, damaged gyroscope  Replace damaged parts
Swagtron Hoverboard T580
Source: ifixit

Problem One: Swagtron T580 Red Light Blinking

If you’re experiencing issues with your Swagtron T580 hoverboard, such as the red light flashing, some several possible causes and solutions can be applied. 

The number of times the red light is flashing provides an indication of the possible problem. Refer to the following table to identify the cause:

Number of Times Red Light Flashing Problem Solution


Loose connection Check and reconnect all connections


Circuit malfunction Replace the circuit board


Motherboard side motor failure Replace the motor on the motherboard side


Battery side motor failure Replace the motor on the battery side


Bad Battery Replace the battery


Battery side gyroscopes faulty  Replace the battery side gyroscopes


Motherboard side gyroscopes faulty Replace the motherboard side gyroscopes

Solution 1: Check Connections

If the red light is flashing once, it indicates a loose connection somewhere inside the hoverboard. Try disconnecting and reconnecting all the connections, including those from the hoverboard’s mainboard to other parts of the hoverboard.

Now, check for any loose connections and fix them. If this doesn’t work, consider replacing the motherboard.

Solution 2: Replace the Circuit Board

If the red light is flashing two or three times, it indicates an internal circuitry problem. Replace the sensors by purchasing a hoverboard circuit board replacement kit and replacing the circuit board.

In this video, you can check the motherboard replacement process-

Solution 3: Replace the Motor

If the red light is flashing four or five times, it indicates a problem with the motor on either the motherboard or battery side. Purchase a replacement hoverboard motor from a reputable dealer and replace the motor on the appropriate side.

Solution 4: Replace the Battery

If the red light is flashing six times, it indicates a bad hoverboard battery. The battery should be replaced with a new one if it is faulty. Here’s a video guide for the process-

Solution 5: Replace the Gyroscopes

If the red light is flashing seven or eight times, it indicates a faulty gyroscope. Buying a complete circuit board replacement kit is recommended rather than replacing the gyroscopes.

There must be a match between the brand, version, and voltage of your gyroscopes and your motherboard. You can get a peek at this video for detailed instructions.

Warning: When performing any repair work on your hoverboard, make sure to wear protective gear (like gloves and goggles) and work in a clean, dry area. If you are not comfortable with repairing your hoverboard, seek the help of a professional.

Problem Two: Swagtron T580 Hoverboard Continuous Beeping With Red Light Flashing

To diagnose and fix a continuous beeping with a red light on your Swagtron T580 hoverboard, follow the steps below.

Solution 1: Check Battery Level

If the red light is blinking, it indicates that the hoverboard has less than 10% charge. Simply leave the hoverboard to charge uninterruptedly until it is fully charged. If this solves the issue, you can stop the troubleshooting.

Solution 2: Recalibrate the Hoverboard

If the issue persists, you can try recalibrating the hoverboard. This process involves resetting the gyroscope and sensor of the hoverboard. Here are the steps:

  • Turn off the hoverboard by pressing and holding down the power button until it turns off.
  • Make sure the foot pedals are level with the ground and each other.
  • Press and hold the power button for 10 seconds until you hear a beep and see the LED lights flashing.
  • Keep pressing the power button until the hoverboard turns off completely.
  • Leave the hoverboard in the off position for a few seconds.
  • To turn the hoverboard back on, press the power button once more.
  • Test the hoverboard to see if the issue is resolved.

If the issue persists, repeat the recalibration process up to five times to fully reset and recalibrate the hoverboard. If the problem persists, move on to the next step.

Solution 3: Contact the Dealer

If none of the above steps solve the issue, it may be a hardware or software problem that requires professional assistance. Contact the manufacturer for further support and assistance.

Problem Three: Swagtron T580 Battery Charging Slowly

Under normal circumstances, a Swagtron battery takes more than three hours to fully charge. If your Swagtron T580 battery is charging slowly, there are a few things you can do to diagnose and solve the problem.

Solution 1: Allow for Full Charge Time

First of all, ensure that you are allowing enough time for a full charge. The Swagtron T580 battery can take up to 4-5 hours to charge fully.

Solution 2: Check Charging Conditions

The next thing you should do is check the charging conditions to ensure that they are correct. The Swagtron T580 battery charges best in temperatures between 32-104℉ (0-40℃)

If the temperature in your charging environment is outside this range, it can cause the battery to charge slowly. Move your Swagtron to a location with the proper temperature range before charging. After connecting the charger, check if the hoverboard is charging properly.

Solution 3: Check the Charger

You should check the charger to ensure that it is compatible with your Swagtron T580 and that it is functioning correctly. You may want to try a different charger to see if it charges faster.

Solution 4: Check the Battery

While you’re at it, you should also check the battery. Ensure that it is not damaged or worn out, which can cause it to charge slowly. If you have used your Swagtron T580 for a long time, the battery may have degraded, and you may need to replace it.

Check Battery
Source: Hoverboard Reviews

Problem Four: Swagtron T580 Not Turning On

If your Swagtron T580 Warrior not turning on, there are a few things you can do to diagnose and fix it.

Solution 1: Use Charger Properly

The first thing you should do is check the charger usage. Make sure you are using the charger correctly. Prior to connecting the hoverboard to the charger, ensure that the green indicator light is on. 

Before plugging in the Swagtron to charge, turn off the power button on the board’s power box.

If you have charged your Swagtron while it was ON, leave the scooter while turned off in a safe place for 24-48 hours. This will reset the hoverboard.

Let the scooter charge again while still in the OFF mode after it has been disconnected from the charger. The LED should change from red to green within fifteen minutes and you should be able to turn it on.

Solution 2: Replace the Battery

If your Swagtron T580 is still not turning on, the battery may be faulty. You can check the light on the main circuit board, located on the opposite side of the battery, by removing the upper covering. 

If it’s faulty, you will have to replace the hoverboard’s battery. 

Problem Five: Swagtron T580 Not Balancing

Did you notice your Swagtron T580 won’t balance? Here’s what you can do to fix it.

Solution 1: Check Self-Balancing Mode

The first thing you should do is ensure that the Swagtron is in self-balancing mode. 

Try riding the hoverboard again after moving it to a flat area and waiting a few minutes. Ensure that both feet are touching the pedals to allow proper detection by the Swagtron. 

The pedals should also be free of any other objects. To prevent the self-balancing sensors from malfunctioning, do not ride the hoverboard sideways or on slopes.

Solution 2: Recalibrate the Hoverboard

If the issue persists, an uncalibrated Swagtron could be the issue. Recalibrate the Swagtron T580 to solve the issue.

Solution 3: Check for Disconnected Wires

There is a possibility that the Swagtron could not function properly due to disconnected wires. Once the outer shell has been removed, check to see if any cables have been disconnected. If all of the cables are connected, disconnect and reconnect every cable.

Solution 4: Replace the Damaged Gyroscope

If the Swagtron still does not balance correctly, a damaged gyroscope could be the issue. Replace the gyroscope to solve the problem.

How to Keep Your Swagtron Hoverboard T580 in Good Condition?

Keeping your Swagtron hoverboard T580 in good condition requires proper cleaning, storage, and transportation. Here are some tips to follow:


Proper cleaning of your hoverboard can promote a longer lifespan and a smoother riding experience. Use a soft, dry microfiber cloth to wipe the outer body/shell of your hoverboard. 

Make sure there are no obstructions around the wheels. While the Swagtron is designed for easy wheel maintenance, make sure you don’t let water or liquids get into its electric parts or battery.


Before storing your Swagtron, make sure the battery is fully charged to prevent it from over-discharging. Every three months, the battery should be discharged and recharged at least once.

Store your hoverboard indoors in a dry area with a temperature range of 14°F to 122°F (-10°C to 50°C). Avoid storing it in a cold garage or shed.


To carry a hoverboard safely, turn it off and use a carrying case or bag. Hold it by the middle with both hands and avoid carrying it by the wheels. Be aware of your surroundings to avoid obstacles.

Source: Family Review Guide

By following these tips, you can keep your Swagtron hoverboard T580 in good condition, ensuring it lasts longer and performs better, giving you a smoother and safer riding experience.

Frequently Asked Questions (FAQs):

How do you turn on a Swagtron hoverboard T580?

The Swagtron hoverboard T580 can be turned on by pressing and holding the power button. You can activate the foot switch by stepping onto the pedal. The hoverboard will enter self-balancing mode and flash its indicator light. Now you’re ready to use the hoverboard. 

How do I know if my Swagtron hoverboard is charging?

To determine if your Swagtron hoverboard is charging, you should first ensure that the charging unit is properly connected to a power source. Once you have confirmed this, plug the other end of the charging unit into the hoverboard. Look for a green light on the hoverboard, which indicates that the charging process has started. 

How do I reset my Swagtron?

To reset your Swagtron, start by holding down the power button for 10 seconds. The LED lights should start flashing after you hear a beep. Once this happens, press the power button again to turn the hoverboard off. After that, turn the hoverboard back on, and it should be reset.


The Swagtron Hoverboard T580 is a popular and fun mode of transportation for many people. However, like any device, it may encounter some technical difficulties. This Swagtron Hoverboard T580 troubleshooting guide has highlighted some common issues that may arise with it.

If users encounter any problems not covered in this guide or the recommended solutions do not work, it is recommended to contact Swagtron’s customer service for further assistance.

Leave a Comment