How to fix hoverboard scratches?

Have you noticed scratches on your beloved self-balancing scooter? Don´t worry, there´re ways to get rid of them and to make the board look like a new hoverboard. Before we dive into the main answer of how to fix hoverboard scratches let´s find out why and where scuff marks appear.

Why do hoverboards scratch so easily?

Here are some common reasons why hoverboards get scratched:

  • Wear and tear: Hoverboards are used for transportation, so they can get scratched with regular use. Over time, the surface of the hoverboard can wear down, making it more prone to scratches.
  • Impact: Dropping or hitting the board against a hard surface can cause scratches. It’s no wonder with your hoverboard sitting so close to the ground. Even a minor impact can cause a scratch, especially if the surface of the hover is not very durable.
  • Improper storage: Storing your vehicle in a place where it can get bumped or knocked over can also cause scuff marks. It’s important to store your self-balancing scooter in a safe and secure place when not in use.
  • Environmental factors: The surface of the board can also get scratched due to environmental factors such as sand, dirt, or other debris on the ground. These particles can scratch the surface of the hover when you ride it.

It’s important to take good care of your self-balancing scooter and to handle it with care to prevent scratches.

How to fix hoverboard scratches

However, hoverboard scratches are often inevitable with regular use, and there are ways to fix them.

The method you use will depend on the severity of the scratches. Here are some methods you can try to scratch-proof your board:

Use a microfiber cloth

If the scuff marks on your board are very minor and you see that there´s paint transfer or black tar, you may be able to use a microfiber cloth with a small amount of polish or rubbing compound to cover hoverboard scratches.

Warning: make sure you turned off your hoverboard before any manipulations.

Use touch-up paint

If the scratches are deeper but not too deep, you can try using touch-up paint. You can find touch-up paint specifically designed for hoverboards online or at your local store. Apply the paint carefully to the scratched area and allow it to dry completely.

While it may be possible to use spray paint to cover hoverboard scratches, it is not recommended. It is not specifically designed for use on hoverboards and could cause additional damage or even void your warranty. Additionally, spray paint can be difficult to apply evenly and could result in a bumpy or uneven finish that may look worse than the original scratches.

If you want to cover hoverboard scratches, it’s best to use touch-up paint that is specifically designed for use on hoverboards. Touch-up paint is formulated to match the original paint color of your board and is easier to apply than spray paint. You can find touch-up paint for hoverboards online or at your local store.

6 1

Read also: How to customize your hoverboard?

Sand and polish the scratches

For a deep scratch, you can try sanding the scratched area with fine-grit sandpaper until the scratch is smooth. After that, you can polish the area with a polishing compound to bring back the shine.

Here are the steps to cover hoverboard scratches:

Step 1. Clean the area around the scratches

Use a soft, damp cloth to wipe down the area around the scratches. This will remove any dust or debris that may have been collected on the surface.

Step 2. Sand the scratches

Use fine-grit sandpaper (around 220 grit) to sand the scratched area. Start by sanding in a circular motion, gradually moving to a back-and-forth motion. Be gentle and apply light pressure. Sand until the scratches are smooth and level with the surrounding area.

Step 3. Clean the sanded area

Use a soft, damp cloth to wipe down the sanded area to remove any dust or debris. Make sure the area is completely clean and dry before moving on to the next step.

Step 4. Polish the area

Use a polishing compound and a clean cloth to polish the sanded area. Apply the polishing compound to the cloth and rub it into the sanded area using a circular motion. Continue until the sanded area is shiny and blends in with the surrounding area.

Step 5. Apply a protective coating

To protect the sanded and polished area from future scratches, apply a clear protective coating. You can use a spray-on clear coat or a clear vinyl wrap.

Make sure to be gentle and patient when sanding, and take care not to sand too much, as this can damage the surface of your hover. Always follow the instructions on the sandpaper and polishing compound carefully.

1 1

Use vinyl wrap

Another option is to cover the hoverboard scratches with a vinyl wrap. You can find vinyl wraps in various colors and designs online. Cut the vinyl wrap to size, and carefully apply it to the scratched area, smoothing out any bubbles or wrinkles.

It’s important to note that any method may not make the scratch completely invisible, but it can certainly improve the appearance of your board.

Read also: Best hoverboard under $200

Frequently Asked Questions

How can I protect my hoverboard from scratches?

There´re accessories that you can consider buying to protect your board.

Hoverboard bumpers are protective covers or guards that are placed on the edges of a hoverboard. They are designed to help protect the hoverboard from damage in case it collides with an object or surface, such as a wall, furniture, or the ground.

q? encoding=UTF8&ASIN=B07M6TVQVH&Format= SL250 &ID=AsinImage&MarketPlace=US&ServiceVersion=20070822&WS=1&tag=electricsc0c4 20&language=en USir?t=electricsc0c4 20&language=en US&l=li3&o=1&a=B07M6TVQVH

The bumpers are typically made of rubber, plastic, or other durable materials that can absorb impact and reduce the risk of scratches, dents, or other types of damage to the hoverboard. In addition to protecting the hoverboard, bumpers can also help to prevent injury to the rider in case of a collision, by cushioning the impact and reducing the risk of falls or other accidents.

Some hoverboards come with built-in bumpers, while others may require the purchase of separate bumper attachments.

Silicone cases are protective covers made of silicone material. They are designed to wrap around the body of a hoverboard. These cases are intended to protect it from scratches, scuffs, and other types of damage that may occur during use or transportation.

q? encoding=UTF8&ASIN=B0B1HLT43P&Format= SL250 &ID=AsinImage&MarketPlace=US&ServiceVersion=20070822&WS=1&tag=electricsc0c4 20&language=en USir?t=electricsc0c4 20&language=en US&l=li3&o=1&a=B0B1HLT43P

Silicone is a popular material for hoverboard cases because it is flexible, durable, and provides a good grip, making it less likely that the hoverboard will slip out of your hands or be dropped. Silicone cases come in various colors, patterns, and designs, allowing riders to customize their boards according to their preferences.

Can you wash a hoverboard?

It is generally not recommended to wash a board with water, as it can damage the electrical components and hoverboard battery, and void the warranty. However, you can clean your board with a dry or slightly damp microfiber cloth to remove dirt, dust, and other debris.

If your hoverboard has accumulated a lot of dirt or mud, you can use a soft-bristled brush or a dry cloth to gently remove the dirt. Avoid using any harsh chemicals or cleaning products, as they can damage the surface of your hover.

It’s important to keep your self-balancing scooter clean to prevent the buildup of dirt and debris, which can affect its performance and cause scuff marks. However, it’s best to avoid washing your board with water and to take precautions to keep it dry and protected from moisture.

If you have to deal with a broken hoverboard read our guide: Are hoverboards waterproof?

maxresdefault 2

How do you clean a hoverboard?

To clean your hover, follow these steps:

Step 1. Turn off the self-balancing scooter

Before cleaning, make sure the board is turned off and unplugged.

Step 2. Remove any loose debris

Use a soft brush or a dry cloth to remove any loose dirt or debris from the surface of the board.

Step 3. Wipe down the hoverboard

Use a slightly damp microfiber cloth to wipe down the surface of the board. Make sure the cloth is only slightly damp, as too much water can damage the electrical components of the hoverboard.

Step 4. Dry the hoverboard

After wiping down the surface of the hover, use a dry microfiber cloth to remove any excess moisture and dry the surface thoroughly.

Step 5. Clean the hoverboard wheels

Use a small brush to clean the hoverboard wheels and remove any debris or dirt that may have accumulated. You can also use a dry cloth to wipe down the wheels.

After cleaning, make sure to store your hoverboard in a dry and safe location. Avoid storing it in a damp or humid environment, as this can damage the electrical components.

5

It’s important to regularly clean your hoverboard’s wheels to maintain its performance and to prevent dirt and debris from causing scratches or other damage. Avoid using any harsh chemicals or cleaning products, as they can damage the surface of the hoverboard.

Read also: How to clean a hoverboard?

Can you repaint a hoverboard?

It is possible to repaint a hoverboard, but it’s important to use the right type of paint and take certain precautions to avoid damaging the electrical components or battery.

Before painting

Make sure to thoroughly clean an entire hoverboard and remove any dirt or debris. Then, apply a paint primer that is specifically formulated for use on plastic or metal surfaces. This will help the paint adhere to the surface of the hoverboard.

Next, apply a paint that is specifically formulated for use on plastic or metal surfaces. It’s important to choose a paint that is compatible with the type of plastic or metal that your hoverboard is made of. You can find this information in the manufacturer’s instructions or by contacting the manufacturer.

When painting

It’s important to avoid getting paint on the electrical components or battery. Cover these areas with masking tape or other protective covering to prevent damage.

After painting

Let the hoverboard dry completely before using it again. It’s important to follow the manufacturer’s instructions carefully and to take precautions to avoid damaging the electrical components or battery.

While repainting your hoverboard can give it a fresh new look, it’s important to consider the potential risks and follow the manufacturer’s guidelines to avoid damaging the hoverboard. If you are unsure about how to repaint your hoverboard, it’s best to consult with a professional or contact the manufacturer for advice.

Read also: How fast does a hoverboard go? The best fastest hoverboards!

Have you ever tried to cover up scratches on your scuffed-up hoverboard? Share in the comments below.

Leave a Comment