How to clean a hoverboard?

It is a good idea to clean your hoverboard regularly to maintain its appearance and functionality. Of course, you´ll get more fun riding a hoverboard that shines bright like a diamond. But it´s not just that.

Regularly cleaning your hoverboard has benefits beyond just maintaining its appearance. Dirt, debris, and dust can clog up moving parts and sensors causing the hoverboard to operate less efficiently.

Thick layers of dirt can also cause the surface to become slippery, increasing the risk of falls. By keeping your hoverboard clean, you can ensure it runs smoothly and safely.

How to clean a hoverboard

So, how to clean a hoverboard?

It won´t take you more than a few minutes. Don´t forget to turn off and unplug your hoverboard before cleaning to prevent any risk of electrical shock.

First of all, you’ll need to brush off any debris that has been collected on the outside of the hoverboard. Use a small brush and pay attention to the footpads and openings. We don´t recommend using a vacuum cleaner as it may damage its internal components.

Now you´ll want to clean different hoverboard parts separately. Here´s the list of the hoverboard parts you should pay attention to.

Cleaning hoverboard wheels

Keeping them clean helps to prevent rust and other forms of corrosion, which can cause damage over time.

Also, a self-balancing scooter is a mechanical structure that has two motors located inside the wheels, and dirt can harm them and reduce the board’s lifespan. To avoid hardware malfunctions, you should clean the wheels regularly.

3

What tools do I need to clean the wheels?

You’ll need the following tools:

  • A damp cloth or sponge
  • Clean water
  • Mild soap or detergent (optional)
  • A small brush or a toothbrush
  • A clean cloth for wiping down

To clean the wheels, follow these easy steps:

  1. Remove any dirt or debris using a brush or cloth
  2. Use a damp cloth to clean the surface of the tires
  3. Remove small stones that are stuck
  4. Dry the wheels thoroughly to prevent rust and other forms of corrosion

Note: It´s not recommended to use a wet cloth, as it can cause corrosion of the internal components. Avoid using water or other liquids near the electrical components to prevent damage.

Read also: How fast does a hoverboard go?

How to take apart hoverboard wheels?

If the tires are very dirty you´ll want to take them apart to clean them better. It´s not as tricky as it may seem, you´ll be able to do it yourself. This is how you should do it.

  1. Turn off the hoverboard and remove the battery.
  2. Locate the screws or bolts that secure the wheel to the board.
  3. Use a screwdriver or wrench to remove the screws or bolts.
  4. Gently lift the wheel away from the hoverboard.
  5. Repeat for the other wheel.

Note: This process may vary depending on the make and model of your hoverboard. If you are unsure, consult the manufacturer’s instructions or a repair guide.

1

What should I check after cleaning the wheels?

Check the following:

  • Condition of the wheels: Look for any cracks, deformities, or other signs of damage.
  • Alignment: Ensure that the tires are aligned correctly with the wheel shaft. Also, always check if the tires are in the same direction as the wheel shaft.
  • Balance: Make sure the wheels are properly balanced.
  • Tension: Check that the wheel axles are securely in place and have the correct tension.
  • Operation: Test the hoverboard to see if it runs smoothly and if the tires turn easily. If you notice any issues, consult a repair guide or a professional for assistance.

Read also: How To Calibrate A Hoverboard?

Cleaning the shells

To clean the shell of a hoverboard, follow these steps:

  • Turn off the board and remove the battery.
  • Use a soft damp cloth or sponge to wipe down the shell with water.
  • If necessary, use mild soap and water to remove any stubborn dirt or stains.
  • Rinse the shell thoroughly with water and dry it with a clean cloth.
  • Avoid using abrasive cleaners or scrubbers as they can scratch the surface.
  • Repeat the process as necessary.

Note: If your hoverboard has decals or stickers, be careful not to damage them while cleaning.

9

Read also: How to customize your hoverboard?

Cleaning the LED lights

You should clean hoverboard LED lights regularly to keep them functioning properly and maintain the quality of the lights. Use a soft cloth and mild cleaning solution to avoid damaging the lights.

Cleaning the battery and charging port

It’s recommended to clean the battery and charging port of your hoverboard regularly to ensure proper charging and functioning. Use a dry cloth to clean the contacts and avoid using water or other liquids.

Steps to follow:

  • Turn off the vehicle and unplug it.
  • Use a dry cloth to clean the contacts of the battery and the charging port.
  • Avoid using water or any other liquids as they can damage the electrical components.
  • Reinsert the battery and plug in the charger to test if it’s functioning properly.
6

Read also: Best hoverboard under $200

Conclusion

As you see it isn´t difficult to clean a hoverboard. If you clean it regularly it won´t take you much time. Use the tips above to maintain your board in perfect condition and it will serve you for many years.

To maximize its lifespan, store it in a cool and dry shed far from sunlight and moisture. Also, make sure that the device is not plugged in when you store it.

Frequently Asked Questions

Why should we clean a hoverboard regularly?

Dirt, dust and debris can damage hoverboards and reduce their lifespan. Proper cleaning and maintenance will ensure the optimal performance and well-being of your beloved friend.

What happens if the hoverboard gets wet?

If a hoverboard gets wet, it may stop functioning properly or even be damaged. This is because the electrical components of a board are sensitive to moisture, which can cause short circuits and potentially harm the device.

To avoid this, it is recommended to avoid exposing a self-balancing scooter to water and to wipe it down if it gets wet. If your buddy has been damaged by water, it is best to have it repaired by a professional.

10

Read also: Are hoverboards waterproof?

How do you dry a hoverboard?

To do it, follow these steps:

  1. Remove the battery and place it in a dry, well-ventilated area.
  2. Dry the exterior: Use a soft cloth to wipe down the exterior of the vehicle, including the wheels and the deck.
  3. Remove water from inside: If water has entered inside, you can use a clean cloth to remove it. Be careful not to damage any electrical components while doing so.
  4. Leave to dry: Place the board in a dry, well-ventilated area where it can air out. Leave it for several hours or overnight to allow any residual moisture to evaporate.
  5. Reinstall the battery if the board is completely dry. Test it to see if it is working properly.

It’s important to handle a wet hoverboard with care and avoid using it until it has completely dried, as operating it while it is wet can cause permanent damage.

Can hoverboards ride on dirt?

Hoverboards can ride on dirt, but it may not be the ideal surface for them. Dirt can be uneven and may cause the board to become unstable, which can be dangerous for the rider. Additionally, dirt can get into the wheels or other moving parts of the vehicle, causing it to stop functioning properly.

If you do choose to ride a hoverboard on dirt, it’s important to be cautious and to choose a smooth and level surface to reduce the risk of accidents. It’s generally recommended to ride hoverboards on smooth, flat surfaces such as concrete or asphalt for optimal performance and safety.

Read also: Do hoverboards work on carpet?

Do you clean your hoverboard regularly? Share in the comments!

Leave a Comment